Tuesday, June 9, 2009

Pillow Case Dress Making Fun


This is a great find! Taken from Jen's Leheney's Blog, "Red Instead"


How to make a Pillowcase Dress - new and improved instructions!

pillowcase_dress_black_red

So, I thought it was high time that I updated these instructions. Now, let me make it clear - people have been making dresses like these since forever and I certainly don’t claim these instructions as my own - in fact, many thanks go to Mama’s Doodles (whose “easy peasy” image I redrew for clarity) and Rostitchery (whose instructions I slightly modified) but I have presented them here because I know there are a lot of people looking for these online.

So without further ado…

pillowcase_dress_black_red2

The traditional method of making pillowcase dresses creates a drawstring casing around the child’s neck, which makes the dresses adjustable for a growing child. This method eliminates the drawstring casing which can be a choking hazard (using elastic instead) while preserving the adjustability of ties.

Start with one pillowcase, cleaned and pressed. You’ll also need 12″ of 1/2″ wide elastic, and one package of bias binding (you get this in the notions section of the fabric store–look for double fold binding tape) or 60” ribbon. You’ll need a couple of safety pins for threading your elastic. Extra rick rack or ribbon is required to decorate the lower edge of the dress (optional).

Full instructions are provided below but here is a quick summary diagram:

pillowcase_dress

step 1 Measure your child from the shoulder to the desired length of the dress. measure this distance on your pillowcase from the open end, and cut straight across. this cut edge will be the top of the dress.

step 2 On each side of the pillowcase, at the cut edge, draw armscyes (that is the dressmaker term for armhole). The shape is like a letter “J” with the top of the J at the cut edge of the pillowcase. For a small child, it should be about 3″ deep, for a larger child make it 4″ deep.

step 3 Fold the two top edges 1/4″ to the inside and press (don’t worry about making it exact–just get close enough). fold down and press these edges again, this time 3/4″. Doing this double turn makes the finished edge neat. Stitch along the first fold, from one end to the other, forming a tunnel (this is known as a casing).

step 4 Cut your elastic into two 6″ pieces. Attach a safety pin to one end of one piece and use that to thread the elastic through one of the casings. As you thread the elastic, the casing will draw up, forming a stretchy neckline. You’ll need to pin the other end of the elastic when it gets to the casing so that it doesn’t come all the way out. Stitch across the open end of each casing to hold your elastic in place. Repeat with the other elastic and casing. stitch across the open end of each casing to hold your elastic in place.

pillowcase_dress_pink

step 5 You’re almost done! Cut two pieces of binding, each 28″ long. You’ll notice that the binding is folded lopsided–one side is wider than the other. This is to help make sure you get both sides stitched. Always stitch with the narrow side of the binding facing up and you can be sure you’re catching the back side as well.

Slip one armscye edge into the fold of one of the binding pieces, leaving about 10″ or so overhanging the top - these form the ties. Pin as much as you feel you need to in order to keep things neat. Beginning at one end of the binding, start stitching along the free edge, continuing all the way around the armscye and to the other end of the binding. Repeat for the other armscye.

pillowcase_dress_pink2

Instead of the binding, you can fold a casing (as you did earlier in step 4) and thread a piece of narrow ribbon 28” long into each of the arm holes, tying into a bow at the top. Once the ribbon is threaded through, sew a couple of stitches at the side seam to keep the ribbon from being pulled all the way out.

step 6 Sew some ribbon or rick rack approx 3 ½ - 4” from the lower edge, catching the original envelope opening of the pillowcase so that it doesn’t catch when your child puts the dress/top on.

pillowcase_dress_pink3

That’s it! The hem is already finished for you.

Now you just have to tie the ties to fit your child and admire your handiwork.

0 comments:

Post a Comment

Links to Cute Sites & Stores